Butterfly Table Mechanism

This hardware allows you to turn a coffee table into a dining table for 6.

Table top: 25 mm (63/64") thick material.

Table top dimension:

Coffee table: two choices: 80 cm x 80 cm (31 1/2" x 31 1/2") or 90 cm x 90 cm (35 7/16" x 35 7/16 ")

Converts into a dining table: two choices: 1.6 m x 80 cm (5 ft 2 in x 31 1/2 in) or 1.8 m x 90 cm (5 ft 10 in x 35 7/16 in)

The mechanism opens up by pulling up the upper cover and putting it down on the smaller cover that automatically comes out from inside the box.

Hardware included, however, 3 concealed hinges #429208145 are needed and sold separately.

- Coffee table: dimensions: 80 cm x 80 cm (31-1/2" x 31-1/2") or 90 cm x 90 cm (35-7/16" x 35-7/16")

- Dining table: dimensions:160 cm x 80 cm (63" x 31-1/2") or 180 cm x 90 cm (70-3/4" x 35-7/16")

Included in the box:

-1 Right mechanism

-1 Left mechanism

-2 Springs 

-24 Screws

-24 Pegs

-2 Spring Tension Pins

The mechanism has a main side and a secondary side, where the unfolded half of the table top rests.

The table top intended for this construction is made in 25 mm thick material. If a thinner material is used, two spacers of the difference have to be used on the lower side of the mechanism.

Tips:

-Use the insertable nuts and the screws supplied with the mechanism to ensure a strong connection between the mechanism and the table construction itself.

-For the articulation of the table top, use 3 concealed hinges #429208145.

-To facilitate the lifting of the superior top half, use edge inserted handles.

-Don't load more than 60 kg onto the table, when open in the high unfolded position.

Datasheet

Instructions