Assembly method

I learned some good method to assemble Furniture.

For example , I explain some of them:

Dowel joint
The end of a piece of wood is butted against another piece of wood. This is reinforced with dowelpins. This joint is quick to make with production line machinery and so is a very common joint in factory-made furniture.


Dovetail joint
A form of box joint where the fingers are locked together by diagonal cuts. More secure than a box joint.






Dado joint
Also called a housing joint or trench joint, a slot is cut across the grain in one piece for another piece to sit in; shelves on a bookshelf having slots cut into the sides of the shelf, for example.






Groove joint
Like the dado joint, except that the slot is cut with the grain
In joinery, a groove is a slot or trench cut into a member which runs parallel to the grain. A groove is thus differentiated from a dado, which runs across the grain.





Mortise and tenon
A stub (the tenon) will fit tightly into a hole cut for it (the mortise). This is a hallmark of Mission style furniture, and also the traditional method of jointing frame and panel members in doors, windows, and cabinets. This joint is a good strong joint to use.





Biscuit

A biscuit joiner (or sometimes plate joiner) is a woodworking tool used to join two pieces of wood together. A biscuit joiner uses a small circular saw blade to cut a crescent-shaped hole (called the mouth) in the opposite edges of two pieces of wood or wood composite panels.